English 
2K COMFORT with two fluid circuits
Extended version of mixing and dosing unit 2K COMFORT
Product Code: 2K COMFORT with two fluid circuits
The WAGNER 2K COMFORT is also available with two fluid circuits that can be operated in parallel. This way, two different materials can be applied simultaneously with only one unit during the cycle of objects that need to be coated. This plays an important role especially for highly reactive materials that need to be physically separated from each other to avoid unit downtimes. With the two-circuit version, each material is provided with its own fluid circuit.
- Simultaneous working with two fluid circuits leads to time savings
- Up to 50% shorter cycle time of coated objects in comparison to predecessor model FlexControl Plus
- Up to 15% lower investment costs compared to two one-circuit units
| POWER SUPPLY | 115 / 230 VAC |
| SUPPLY FREQUENCY | 50 / 60 Hz |
| MIXING ACCURACY | +/- 1% |
| MIXING RATIO | 0.1 : 1 - 50 : 1 |
| MATERIAL PRESSURE | Max. 325 bar |
| FLOW RATE | 50 - 7000 cc / min (depending on measuring cell) |
| MATERIAL INPUT | G 1/4" male thread, 60° inner cone |
| MATERIAL OUTPUT | 1/4" NPS male thread, 60° inner cone |
| COMPONENTS A | Max. 10 per fluid circuit |
| COMPONENTS B | Max. 5 per fluid circuit |
| COMPONENTS C | Max. 5 per fluid circuit |
| FLUSH A | Max. 5 per fluid circuit |
| FLUSH B | Max. 2 per fluid circuit |
| FLUSH C | Max. 2 per fluid circuit |
| GUNS | 2 per fluid circuit |
| MATERIAL TEMPERATURE | +5 °C - +60 °C; +41 °F - +140 °F |
| AMBIENT TEMPERATURE | +5 °C - +60 °C; +41 °F - +140 °F |
| MATERIAL VISCOSITY | 20 - 2200 mPas, depending on measuring cell |
| REMOTE CONTROL | One for each fluid circuit |
| PH VALUE MATERIAL | pH 3.5 - 9 |
