Cup-gun PEM-X1 CG
Ergonomic powder gun
Product Code: Cup-gun PEM-X1 CG
The simple handling and perfect ergonomics of WAGNER cup guns make them ideal for lab and development purposes and for powder coating individual items and very small quantities.
- Simple plug-in principle for the cup
- Short and safe paint change times of approximately 15 seconds.
- Funnel beaker with special geometry
- The different slope angles ensure constant flow even with difficult powder types
- Integrated Venturi feeding principle
- Very fine and constantly homogeneous dosage dispensing of the powder quantity
- The coating parameters are set via the control module
- All coating-relevant parameters are saved and accessed via the fully electronic control module
|AIR INLET PRESSURE
|0,3 MPa, 3,0 bar, 44 PSI
|5 – 45 °C, 41.0 – 113.0 °F
|0,6 kg, 1.2 lb